shotgun lathe and plaster wall penetration test

īuilding temporary wood scaffolding, barricades, and safety guardrails. Ĭonstructing upholstered furniture frames made of plywood or lumber. The stapler can securely attach materials to wood frames on upholstery projects.Īffixing rubber or foam baseboard molding around rooms. įastening overlapping seams on plastic vapor barrier sheeting. Īttaching exterior house wraps and weather barrier membranes. Securing insulation sheets and foam boards to walls and ceilings. Keep the staples centered on the width of the furring strips. 1x2 and 1x3 furring are applied the same way as lath. On inside and outside wall corners, do not extend lath boards all the way to corner. Staple overlapping ends of lath boards at 45 degree angles to reduce chances of them lifting.Ĭheck periodically that staples are fully penetrating into the studs or joists behind the lath.īe aware of hitting plumbing or wiring hidden behind the lath. Keep them centered on the width of the lath. Position the stapler crown centered over the lath board gap when driving staples.įire a test staple into scrap materials first to check staple penetration and crown setting.ĭrive staples every 4 inches along the length of the lath boards. Place the lath boards with a 1/8' to 1/4' gap between them. Hold the stapler firmly and straight against the lath and framing. Too little pressure leads to inadequate penetration. Adjust the air pressure on the compressor to 70-90 PSI for best results. Use a shorter staple for thinner lath material. Load the stapler with wide crown staples designed for lath. Lathing Step-by-Step with a Wide Crown Stapler With nails, each board requires its own individual fasteners. Staples attach two lath boards with a single fastener. The staples distribute force over a wider area. Wide crown staples are less likely to split lath boards. The wide crowns provide excellent holding power while sitting nearly invisible atop lath.

This provides a very secure base for plaster and wood.

The wider staple crown distributes force over more area, giving more holding power than narrow crown staples. The stapler mechanism ensures each staple sits flush with the lath, rather than potentially poking through or being driven at angles. Why Use a Wide Crown Stapler for Lathing? Wide crown staplers are ideal for lathing because they can securely fasten laths made of 1x2 or 1x3 dimensional lumbers. The wide crown helps distribute pressure and resist pull-through. U sing a wide crown stapler can make the lathing process much faster and easier.Ī wide crown stapler, sometimes called a staple gun, is a pneumatic power tool that drives wide-legged staples into thick material like wood. It involves fastening thin strips of wood, known as laths, horizontally across the wall surface to form a base. Lathing is a technique used to create a backing for plaster on walls and ceilings.

Shotgun lathe and plaster wall penetration test